Palma Vita Wash & Dry Toilet
The Palma Vita has been purpose-designed to combine a conventional WC with integrated washing and drying.
It is the only toilet of its kind, specifically developed for elderly and disabled people, that is designed to properly support the user AND position them correctly for effective washing and drying.
Most effective wash available in a wash and dry toilet
Enables the user to toilet with little or no help
Can be used by all members of the household
Easy to use regardless of manual capability/dexterity
Closomat’s unique OneTouch system allows the user to benefit from the toilet’s automatic functions by just pressing and releasing the elbow pad
Removes hand:body contact and risk of faecal contamination
Delivers a consistent, high level of cleanliness
Only wash & dry toilet that is Medical Device Class 1 certified 2
Only wash & dry toilet that can be adapted to accommodate user’s changing needs
Can be fitted in Zone 1 of a bathroom/wetroom
Safe working load: 190kg/30st
Bariatric Palma Vita (with Big John seat) Safe working load: 362kg/57st
The Closomat Palma Vita with any of the accessories featured on the accessories tab achieves Medical Device Class 1 certification, in that it can be used specifically to alleviate issues arising from someone’s disease, and help compensate for a person’s injury or handicap, especially those who have restricted use of their hands.
Electrical installation should be in accordance with I.E.E. Regulations (Current Edition).
220/240v single phase AC supply is required, (loading 10 amp, maximum power 1300 watts).The Clos-o-Mat is supplied with 3 core cable attached. A fused spur is required for isolation.
Spur outlet to be located in accordance with current I.E.E. Regulations (Current Edition).
Clos-o-Mat has IPX4 rating.
Bathroom/Shower Room Installations
The Closomat must not be in direct line with the shower spray. Some form of partition between shower and Closomat is advisable to prevent any water spraying directly onto the equipment.
A shower should not be used in conjunction with the Closomat. i.e. under no circumstances must a user shower whilst seated on the Closomat.
It is essential that the entering water is cold.
15mm cold water service only.
We would recommend water supply isolated via isolation valve.
Water supply can be from level storage or mains.
Boiler Capacity: 1.7 litres.
Water rate: min. 8 l/min. max. 0.8 PMa (8 bar).
Cistern capacity: 6-9 litres, set at 6 litres.
The Closomat has an internal overflow which discharges into the W.C. pan through the flush valve.
Relevant soil connector to be sourced by installer.
Soil connections suitable for Closomat; S-Trap (vertical fall) wall to centre of pipe from 70mm-250mm max. P-Trap (horizontal) floor to centre of pipe 200mm max.
The Closomat is suitable for all turned trap outlets, through purpose made removable side covers on lower level.
No permanent hand rails or other obstructions should be fitted across the front or top of the unit.The white outer casing has to be pulled upwards and forward to remove for servicing purposes.
Unit not rated for altitude. 2000m is the maximum.
This application requires an earth connection